Thermal stability of natural fibers and their polymer composites

Natural fiber-based composites are applied in many structural engineered products from civil constructions to automobile manufacturing due to the properties such as low density, high aspect ratio, biodegradability and ease to work. During the past decades such composites have been thoroughly studied for their mechanical properties and failure behavior and their properties compared with those of synthetic fiber-based composites. Other properties, such as the thermal behavior of natural fibers and composites, have also been studied because they determine the performance of their products possible. It deals with the effect of temperature on adhesive curing, effect of high temperature and fire damage during fabrication. Further, the thermal properties have equal importance in structural applications such as temperature transfer from end to end, load capacity at specific temperature, material behavior and dimensional stability at high temperature. In this respect the isothermal and non-isothermal thermogravimatric analyses are discussed and the improtance of glass transition temperature is studied during prepapration of composites to ensure their ultimate properties. Although there are several works that have been done on thermal behavior, especially thermogravimetric analysis of natural fibers and their composites, there is no review article available specially focused on natural fiber-based composites, hybrid composites, and nanocomposites. The aim of this review was to focus on the advances in the comprehension of thermogravimetric behavior of natural fibers and compare the effect of natural fibers as reinforced materials in polymer composites.     

Clean hydrogen generation and storage strategies via CO2 utilization into chemicals and fuels: A review

Hydrogen becomes one of the most clean energy sources. The major issues on hydrogen are lack of practical clean and high‐temperature processes and possible practical storage of clean hydrogen. An energy intensive of clean hydrogen storage via chemical and liquid fuel production route is the current demand. This article reviewed the most recent research for hydrogen (H₂) production by using several methods, such as thermochemical process, thermal decomposition, biological approaches, electrolysis, and photocatalytic method. H₂ storage types, including physical and chemical approaches, were also reviewed. The produced H₂ was stored as valuable chemicals and fuels via CO₂ hydrogenation reaction. Reactor designs are the illustrated number of design ranging from the fixed bed to the continuous stirred tank reactor. Catalyst type, catalytic system, and the related mechanism of CO₂ hydrogenation reaction to form alcohol, alkanes, and carboxylic acid were also discussed in detail.     

Auto-recognition and part model complexity quantification of regular-freeform revolved surfaces through delta volume generations

Engineering with Computers - Vast research works implementing feature-based technology have successfully been devoted. However, work on recognition of revolved regular-freeform surfaces is still...     

Sign Language to Sentence Formation: A Real Time Solution for Deaf People

Communication is a basic need of every human being to exchange thoughts and interact with the society. Acute peoples usually confab through different spoken languages, whereas deaf people cannot do so. Therefore, the Sign Language (SL) is the communication medium of such people for their conversation and interaction with the society. The SL is expressed in terms of specific gesture for every word and a gesture is consisted in a sequence of performed signs. The acute people normally observe these signs to understand the difference between single and multiple gestures for singular and plural words respectively. The signs for singular words such as I, eat, drink, home are unalike the plural words as school, cars, players. A special training is required to gain the sufficient knowledge and practice so that people can differentiate and understand every gesture/sign appropriately. Innumerable researches have been performed to articulate the computer-based solution to understand the single gesture with the help of a single hand enumeration. The complete understanding of such communications are possible only with the help of this differentiation of gestures in computer-based solution of SL to cope with the real world environment. Hence, there is still a demand for specific environment to automate such a communication solution to interact with such type of special people. This research focuses on facilitating the deaf community by capturing the gestures in video format and then mapping and differentiating as single or multiple gestures used in words. Finally, these are converted into the respective words/sentences within a reasonable time. This provide a real time solution for the deaf people to communicate and interact with the society.     

A Short Review on Copper Calcium Titanate (CCTO) Electroceramic: Synthesis,Dielectric Properties,Film Deposition,and Sensing Application

Nano-Micro Letters - Electroceramic calcium copper titanates (CaCu3Ti4O12, CCTO), with high dielectric permittivities (ε) of approximately 105 and 104, respectively, for single crystal and...     

Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

The potential of activated carbon prepared from kenaf fiber (KF) to remove copper (II) from aqueous effluents was investigated. The fibers were first semi-carbonized, then impregnated with potassium hydroxide (KOH) and finally activated by using carbon dioxide (CO₂) gas to produce activated carbon. Pore structure and physical characteristics of the prepared kenaf fiber activated carbon (KFAC) were determined. Adsorption studies for divalent copper (Cu) ions were carried out to delineate the effect of contact time, temperature, pH and initial metal ion concentration on equilibrium adsorption capacity. The experimental data followed pseudo-second-order kinetics and Elovich Model than pseudo-first-order. Langmuir, Freundlich and Temkin models were implemented to analyze the parameters for adsorption at 30 °C, 50 °C and 70 °C. Thermodynamic parameters such as ??G ^o , ??H ^o and ??S ^o which represent Gibbs free energy, enthalpy and entropy, respectively, were evaluated. It was concluded that activated carbon from kenaf fiber (KFAC) can be used as an efficient adsorbent for removal of Cu (II) from synthetic wastewater.     

Study on micro-patterning process of vertically aligned carbon nanotubes (VACNTs)

Vertically aligned carbon nanotubes (VACNTs) have drawn significant attention by the researchers because of their nanometric size and favorable material properties. Patterning of CNT forests in the micrometric domain is very important for their application in the area of microelectromechanical system (MEMS). For the first time this paper reports, detailed experimental investigation on a post growth μ-patterning process of VACNT forests. The micromechanical bending (M2B) process was locally applied at the targeted area in order to change the alignment of VACNT forests. Interestingly, the VACNT forest was transformed from typical black body absorber to reflective mirror as the M2B process was applied. Several parameters were identified that govern the resultant patterns such as rotational spindle speed, lateral bending speed, step size, tool morphology, and total depth of bend. Optimization of the parameters was carried out experimentally to obtain the best surface roughness and integrity of the microstructure. A minimum average surface roughness of Ra = 15 nm was achieved with 2000 rpm spindle speed, 1 mm/min bending speed and 1 µm step size.     

Effect of Synthesis Technique and Carbonate Content on the Crystallinity and Morphology of Carbonated Hydroxyapatite

The syntheses of nanosized carbonated hydroxyapatite（CHA） were performed by comparing dropwise and direct pouring of acetone solution of Ca（N0₃）₂-4H₂0 into mixture of（NH₄）₂HP0₄ and NH₄HCO₃ at room temperature controlled at pH 11.Direct pouring method was later applied to study the increment of carbonate content in syntheses.The as-synthesized powders were characterized by various characterization techniques.The crystallographic results of the produced powders were obtained from X-ray diffraction analysis,whilst the carbonate content in the produced powders was determined by the CHNS/O elemental analyzer.Fourier transform infrared analysis confirmed that the CHA powders formed were B-type.Field emission scanning electron microscopy revealed that the powders were highly agglomerated in nanosized range and hence energy filtered transmission electron microscopy was employed to show elongated particles which decreased with increasing carbonate content.     

Adapting technology: effect of high-involvement HRM and organisational trust

This study is designed to empirically test a model of high-involvement human resource management (HIHRM), organisational trust, and technology adaptation grounded on social exchange theory in the context of the private banking sector. The proposed model intends to add to the understanding of the effect of HIHRM on technology adaptation via the mediating influence of organisational trust. Frontline employees were surveyed using a self-administered questionnaire. Results from partial least square-structural equation modelling suggest that there is a significant influence of HIHRM on technology adaptation. Organisational trust further mediates the relationship. Thus, this paper finds an answer to the ‘black box’ of human resource management (HRM) practices, explaining how HIHRM influences employees’ attitudes towards technology adaptation. The study can help management have a better understanding of the importance of employee involvement-oriented HRM in introducing and implementing a new technology through the integration of trust processes in the organisation.